DOS above ground water tank, ICE model, size 500 700 1000 2000 3000 liters free float with every order

- DOS ICE above ground water tanks with a capacity of 500, 700, 1,000, 2,000 and 3,000 liters are used to store water for use in homes and offices.

- The tank is made of special grade H950 Compound Polymer material, strong and durable.

- 100% Food Grade material, no recycled materials mixed, safe and free from contaminants, can be filled with water for direct consumption.

- UV protection up to level 8, color does not fade or crack.

- Pop Up cover drains overflow, prevents damage to the tank caused by the float not working.

- Tightly closed screw cap, completely prevents dust, ants or insects.

- Specially designed screw fittings are durable and convenient to install.

- Bottom design of the tank is attached to the floor, prevents water from stagnating and does not allow dust and insects to collect.

- Opaque material, sunlight cannot pass through, prevents algae growth, no unpleasant odor.

- Free from lead and mercury, clean, safe, certified by the FDA international standard from America.

- Same standard as drinking water pipes, strong and durable material. Passed TIS standards.

- 15-year product warranty (according to manufacturer's conditions)

- Ice blue color

*** Free float with every order ****

Additional recommendations

- The area supporting the bottom of the tank must be strong enough to support the weight and the water tank. The surface is smooth and larger than the bottom of the tank. There is no debris left. It is level and consistent. It is not tilted or some materials are used as a support.

- When installing in an open area with strong winds, the tank should be secured with a wire rope threaded through a pipe around the tank cover and secured to the floor.

- Install the tank in a normal environment (Ambient Temperature) and can be easily maintained. It is away from heat sources and chemicals.

- Installing in the shade will extend its service life.

- When connecting threaded pipes, use only standard water pipe threads and use tape to prevent leakage. Tighten it until it is hand tight (tightening too much may cause leakage).

- Use a union pipe to connect the inlet and outlet pipes for easy maintenance in the future.

- When connecting the inlet and outlet pipes of the tank, if there are heavy equipment, such as valves that are heavy, Use a support device for that device.

- In the case of a very long pipe length, there must be a support point at intervals of approximately 50-60 cm. and must be placed flat on the floor and at the same level as the outlet pipe.

- If the pipe is connected to the water pump, if there is vibration, the vibration must be reduced by using a Flex pipe or a vibration-reducing pipe.

- The inlet-outlet pipe and the sediment drain pipe should be equipped with a valve for easy maintenance.

- When installing the float, please refer to the float manual (the float is not under the tank's warranty).

- AIRVENT should be installed to prevent damage to the float or failure to cut off the water.

** Important, please read carefully. **

1 order per 1 item

Issue a tax invoice. Please fill in the details in the order completely.

Shipping preparation time 5-7 business days (Bangkok) / 10-20 business days (upcountry)

Therefore, combined delivery cannot specify a specific date.

!! In the case that the customer cancels the product when the product cannot be brought into the building or work site or the product is being delivered and the customer wants to change the size or other things, the sending factory Permission to charge a fee of 500 baht according to the take-back policy!!